Jaquar Premium Wall Mounted Bathtub Spout Series provides high-volume wall-mounted water delivery for luxury bathtub installations. Machined from solid brass conforming to IS:1264-1997 and IS:319-1989, each spout mounts flush against finished bathroom tiles with an integrated slide-on wall flange that conceals the raw wall pipe outlet for a clean, seamless finish. The certified M 24×1 Neoperl aerator (WRAS and ACS approved) mixes air into the stream for a splash-free, foam-rich bathtub filling experience. Available in three design styles – Opal Prime (soft cylindrical curves), Kubix Prime (sharp square geometry), and Alive (fluid organic form).
The chrome finish is electroplated to 10.0?m Nickel and 0.3?m Chrome, validated to 500+ hours salt spray resistance for long-term corrosion protection in humid bathroom environments. The spout does not include a built-in diverter – water switching between the bathtub spout and shower is controlled via the concealed mixer valve. The in-wall mixer valve is sold separately.
Key Features
Integrated wall flange: Slide-on chrome flange masks the raw wall pipe outlet for a clean, gap-free finish against tiles
WRAS and ACS certified Neoperl aerator: M 24×1 aerator produces a splash-free, foam-rich stream into the bathtub
500+ hour salt spray validated chrome: 10.0?m Nickel and 0.3?m Chrome electroplating resists tarnishing and corrosion in humid bathrooms
Solid brass construction: Machined from IS:1264-1997 and IS:319-1989 certified brass for long-term pressure resistance
3 design styles: Opal Prime, Kubix Prime, and Alive – additional finishes available including Antique Bronze, Black Matt, Blush Gold, and Graphite
Design Variant Comparison
Specification
Opal Prime (SPJ-CHR-15429PM)
Kubix Prime (SPJ-CHR-35429PM)
Alive (SPJ-CHR-85429)
Design Style
Soft cylindrical curves
Sharp square / geometric
Fluid organic form
Flow Rate @ 3 Bar
17.18 LPM
17.18 LPM
22.81 LPM
Operating Pressure
0.5 – 5.0 Bar
0.5 – 5.0 Bar
0.5 – 5.0 Bar
Aerator
M 24×1 (WRAS and ACS)
M 24×1 (WRAS and ACS)
M 24×1 (WRAS and ACS)
Chrome Plating
Ni 10.0?m / Cr 0.3?m
Ni 10.0?m / Cr 0.3?m
Ni 10.0?m / Cr 0.3?m
Salt Spray Rating
500+ hours
500+ hours
500+ hours
Water Tightness
16 Bar (Pass)
16 Bar (Pass)
16 Bar (Pass)
Pressure Resistance
25 Bar (Pass)
25 Bar (Pass)
25 Bar (Pass)
Installation Notes
Important – Read Before Installation
Wall connection: The wall pipe outlet must have a standard 1/2″ BSP male thread for the spout to connect correctly
Flush the supply line first: Force water through the open wall outlet to clear sand, plaster debris, and thread tape residue before fitting the spout
Apply PTFE tape: Wind PTFE plumbing thread seal tape clockwise on the male wall nipple before threading on the spout for a leak-proof seal
Fit the flange: Slide the decorative chrome wall flange down the spout shaft before connecting to the wall – seat it flush against the tile surface after tightening
Nozzle orientation: Ensure the spout exit nozzle points directly downward into the bathtub when tightened
Aerator maintenance: Periodically unscrew the M 24×1 aerator tip to rinse out mineral sediment – keeps the water stream uniform
In-wall mixer valve required: Purchase the compatible Jaquar concealed mixer valve separately to control water flow and temperature
Why Buy from HomeRun?
Authentic Jaquar Product: Verified genuine product sourced from authorized Jaquar channels
60-Minute Bangalore Delivery: Express delivery to active service zones – ideal for active plumbing and renovation projects
Project-Friendly Availability: Single-unit ordering for bathroom-by-bathroom procurement on residential and commercial fit-outs
Reviews
There are no reviews yet