Jaquar Ornamix Prime Bathtub Spout (SPJ-CHR-10429PM) is a wall-mounted plain bathtub fill spout with matching decorative wall flange, machined from solid brass ingots, rods, and sheets. It mounts flush against finished bathroom tiles via a 1/2″ BSP thread connection, with the 52 x 52mm slide-on wall flange covering the raw pipe outlet for a clean, seamless finish. The certified M 24×1 Neoperl aerator (WRAS and ACS approved) mixes air into the stream for a splash-free fill at 18.57 LPM at 3 Bar.
The chrome finish is electroplated to 10.0µm Nickel and 0.3µm Chrome, validated to 500+ hours salt spray resistance. Backed by a 10-year manufacturer warranty. Suitable for pairing with concealed bath-shower diverter mixer valves from the Jaquar Alive, Vignette, or Ornamix body mixer series. The in-wall mixer valve is sold separately.
Key Features
Integrated wall flange: 52 x 52mm slide-on chrome flange masks the raw wall pipe outlet for a gap-free finish against tiles
WRAS and ACS certified Neoperl aerator: M 24×1 aerator produces a splash-free stream at 18.57 LPM
500+ hour salt spray validated chrome: 10.0µm Nickel and 0.3µm Chrome electroplating resists tarnishing and corrosion
Solid brass construction: Machined from brass ingots, rods, and sheets for long-term pressure resistance
10-year manufacturer warranty: Backed by Jaquar’s long-term warranty against casting defects and finish issues
Technical Specifications
Technical Specifications (Quick Reference)
Specification
Details
Brand
Jaquar India
Range
Ornamix Prime
Product Code
SPJ-CHR-10429PM
Flow Rate
18.57 LPM at 3 Bar
Operating Pressure
0.5 Bar (Min) to 5.0 Bar (Max)
Inlet Connection
1/2″ BSP thread
Projection Length
180 mm
Wall Flange Size
52 x 52 mm
Aerator
M 24×1 (WRAS and ACS certified)
Chrome Plating
Nickel 10.0µm + Chrome 0.3µm
Salt Spray Rating
500+ hours validated
Water Tightness
16 Bar (Pass)
Pressure Resistance
25 Bar (Pass)
Warranty
10-Year Manufacturer Warranty
Installation Notes
Step-by-Step Installation
Flush the supply line: Force water through the open wall outlet to clear construction debris, sand, and plumbing scale before fitting the spout
Apply PTFE tape: Wind PTFE thread seal tape clockwise onto the 1/2″ male wall pipe outlet for a leak-proof seal
Slide on the flange: Thread the decorative chrome wall flange onto the rear of the spout shaft before connecting to the wall
Thread and tighten: Carefully thread the spout onto the wall pipe by hand to avoid cross-threading, then tighten securely with the nozzle pointing straight down into the bathtub
Test for leaks: Turn on the main valve and check that there is no water seeping behind the flange before finishing
Why Buy from HomeRun?
Authentic Jaquar Product: Verified genuine product sourced from authorized Jaquar channels
60-Minute Bangalore Delivery: Express delivery to active service zones – ideal for active plumbing and renovation projects
Project-Friendly Availability: Single-unit ordering for bathroom-by-bathroom procurement on residential and commercial fit-outs
Reviews
There are no reviews yet