Fevicol Grippo WG is a high-performance, water-based synthetic resin adhesive engineered for industrial woodworking, furniture manufacturing, and large-scale assembly operations. Supplied in a 50 kg industrial drum, it is formulated as a ready-to-use, solvent-free adhesive that provides high initial tack and rapid strength development – making it suited for high-speed production environments where minimising clamping time and maximising throughput are critical. The adhesive creates a strong, flexible bond that resists shrinkage and cracking, ensuring joints remain stable under environmental stress including temperature cycling, humidity variation, and the mechanical loads typical of furniture and cabinetry in regular use.
The precisely controlled viscosity of 300-450 Poise at 30 degrees C (Brookfield RVT at 20 RPM) allows for uniform spreading with minimal wastage in both manual brush and roller application and automated glue spreader systems – the low shear thinning properties ensure consistent bead and film deposition across high-speed automated lines without clogging or inconsistent coverage. The adhesive is valued in industrial applications for its heat tolerance and moisture resistance, preventing warping or delamination of veneers and laminates over time – a critical performance requirement in furniture and cabinetry exposed to kitchen and bathroom humidity levels. Meeting ISO 9001, ISO 14001, and OHSAS 18001 compliance standards, it is suitable for professional indoor and commercial manufacturing environments. The 50 kg drum format is designed for professional volume use in board-to-board lamination, cabinetry production, and specialized industrial applications including paper bag bottom pasting and shipper box manufacture.
Key Features
High Initial Tack and Rapid Bond Development: Engineered for fast grab to reduce clamping time and speed up production cycles – critical for high-volume furniture and cabinetry assembly lines where extended clamping reduces throughput.
Anti-Shrink Formula – Flexible Bond: Forms a strong, flexible bond that penetrates wood fibres and resists cracking or debonding during temperature and humidity cycles – joints remain stable over the service life of the furniture or panel.
Industrial Machine Compatibility: Optimized viscosity (300-450 Poise) for both manual stencil application and automated glue spreader machines – low shear thinning properties ensure consistent coverage on high-speed production lines without clogging or film inconsistency.
Heat and Moisture Resistance: Advanced resin composition resists humidity and heat – prevents veneer and laminate delamination in environments with elevated temperature or moisture exposure over the product’s service life.
Water-Based, Solvent-Free Formula: Non-toxic, environmentally compliant adhesive safe for professional indoor and commercial manufacturing use – meets ISO 9001, ISO 14001, and OHSAS 18001 standards.
Technical Specifications
Technical Specifications (Quick Reference)
Specification
Details
Manufacturer
Pidilite Industries Ltd.
Brand
Fevicol
Article Code
GRIPPO_WG_50
Product Type
Synthetic Resin Adhesive (Water-Based)
Pack Size
50 kg (Industrial Drum / Bucket)
Appearance
Off-white emulsion (dries clear/white)
Not Recommended For
Do not use Fevicol Grippo WG in the following situations
Substrates made of PE (polyethylene), PP (polypropylene), or PTFE (Teflon)
Applications involving permanent water immersion or continuous exposure to strong acids
High-temperature industrial gasketing applications
Structural gap-filling – this product is a thin-film assembly adhesive, not a gap filler
Application Guidelines
Step-by-Step Application
Surface preparation: Ensure all bonding surfaces are clean, dry, and free of oil, grease, dust, and prior adhesive residue – contamination at the glue line is the most common cause of bond failure.
Application: Apply a thin, uniform layer of adhesive to one or both surfaces using a brush, roller, or automated glue spreader – consistent coverage without pooling or voids is critical for a uniform bond across the full joint area.
Positioning: Join the surfaces while the adhesive is still wet – the product’s open time allows for accurate alignment before contact. Do not allow the adhesive film to fully dry before joining.
Curing: Apply uniform pressure using clamps or press weights across the full bonded area. Initial setting occurs quickly; allow a minimum of 24 hours for a full, permanent bond before subjecting the joint to load or machining.
Recommended Applications
Where Fevicol Grippo WG fits best
Furniture Manufacturing: Modular furniture, cabinetry, and board building operations where high initial tack, rapid bond development, and consistent machine compatibility are required for volume production.
Lamination – Cold Press: Pasting laminates to plywood and particle board in cold press machines – the controlled viscosity ensures even film deposition under press pressure without squeeze-out or starvation at the glue line.
Paper and Packaging: Paper bag bottom pasting, shipper box manufacture, and manual casing in bookmaking – applications where water-based adhesive chemistry is preferred for environmental and process compliance.
Wood-to-Wood and Plywood Assembly: General wood-to-wood bonding, plywood lamination, and MDF assembly in joinery, interior fitout, and modular furniture production.
Industrial Interior Fitout: Large-scale interior fitout projects – wall panelling, kitchen and wardrobe carcass assembly, and surface lamination – where volume adhesive supply in 50 kg drums is required for project continuity.
Why Buy from HomeRun?
Authentic Fevicol Product: Verified genuine Pidilite product with manufacturer quality assurance
60-Minute Bangalore Delivery: Express delivery to active service zones – ideal when your production line or site needs adhesive replenishment immediately
Project-Friendly Availability: 50 kg industrial drum format suited for volume production and large fitout projects
Reviews
There are no reviews yet