Ebco Aluminium Profile Shutter Handle End Cap 1935 is a finishing accessory for 19 x 35mm aluminium profile handles – the slim, recessed pull handles widely used on kitchen shutter doors, wardrobe panels, and modular cabinet shutters in contemporary Indian interiors. Each set contains a pair of Left and Right end caps – one cap for each end of a single profile handle – providing clean, flush closures that seal the open profile ends, protect the cut edges of the aluminium extrusion, and give the installed handle a fully finished, professional appearance. Without end caps, a cut profile handle has exposed hollow ends that collect dust, show the internal extrusion cavity, and present an unfinished edge that detracts from the quality of an otherwise well-fitted cabinet.
The end caps are precision-manufactured at 20 x 35mm to fit snugly into the 19 x 35mm profile opening – the slight dimensional difference creates a press-fit that seats the cap flush with the profile face without the need for adhesive or fixing screws. Available in multiple finishes to match the aluminium profile handle being used, ensuring the completed handle assembly presents as a single cohesive unit from tip to tip. For modular kitchen and wardrobe installers, these end caps are an essential small-quantity accessory to have on-site at the time of handle installation – fitting them at the end of the installation adds a professional finish to every door in the project.
Key Features
Pair of Left and Right End Caps per Set: Each set includes both end caps needed to complete one full profile handle installation – one cap for the left end and one for the right end of the same handle, supplied together as a matched pair.
Precision Fit for 19 x 35mm Profiles: Dimensioned at 20 x 35mm to press-fit securely into the 19 x 35mm profile opening – seats flush with the profile face without adhesive, providing a stable, professional end closure that does not loosen with daily door use.
Professional Finishing Touch: Seals exposed cut ends of the aluminium extrusion – protects against dust accumulation inside the profile cavity and eliminates the unfinished hollow-end appearance that would otherwise be visible at each end of the installed handle.
Multiple Finishes Available: Supplied in a range of finish options to match the most common aluminium profile handle finishes – select the finish that corresponds to your profile handle for a seamless, single-material appearance across the full handle length.
Simple Press-Fit Installation: No adhesive or fixing hardware required – the end cap presses firmly into the profile opening and stays in place through the press-fit friction of the dimensioned fit. Installation takes seconds per handle.
Technical Specifications
Technical Specifications (Quick Reference)
Specification
Details
Brand
Ebco
Product Type
Aluminium profile handle end cap
End Cap Dimensions
20 x 35mm
Compatible Profile Size
19 x 35mm aluminium profile handles
Material
Aluminium
Finish Options
Multiple finishes available
Packaging
1 set – Pair of Left and Right end caps (2 pieces)
Installation
Press-fit – no adhesive or fixings required
Warranty
Ebco manufacturer quality assurance
Installation Guidelines
Step-by-Step Installation
Profile preparation: Ensure the 19 x 35mm profile handle is cut to the correct length and the cut ends are clean, square, and free from burrs – a rough or angled cut end will prevent the end cap from seating flush.
Identify left and right caps: The set includes one Left and one Right end cap – identify which end cap corresponds to each end of the profile before fitting.
Press-fit the end cap: Align the end cap with the profile opening and press firmly until the cap seats flush with the face of the profile – no adhesive or screws are required.
Verify finish match: Confirm the end cap finish matches the profile handle finish before pressing into place – end caps are not easily removed once fully seated without risk of damage.
Inspect the fit: Check that both end caps sit flush, with no gap between the cap face and the profile end, and no cap protrusion beyond the profile face.
Recommended Applications
Where the Ebco End Cap 1935 is used
Modular Kitchen Shutter Handles: The primary application – completing the installation of 19 x 35mm profile handles on kitchen shutter doors, providing a clean finished end on every door in the kitchen fitout.
Wardrobe Door Handles: Professional finishing for 19 x 35mm profile handles on wardrobe sliding and swing doors – the end cap completes the handle at both ends for a furniture-grade appearance.
Cabinet and Storage Handles: Any modular or custom cabinet using 19 x 35mm aluminium profile handles – pantry units, utility cabinets, bathroom vanities, and storage walls.
Replacement and Repair: Replacement end caps for installed handles where the original caps have been lost, damaged, or were not supplied with the original handle purchase.
Commercial Interior Fitouts: Office, retail, and hospitality cabinet installations where profile handles are specified and a fully finished installation standard is required.
Why Buy from HomeRun?
Authentic Ebco Hardware: Verified genuine accessories
Project-Friendly Availability: Complete your handle installations without delay
Bangalore Fulfilment: Quick local availability for urgent needs
Reviews
There are no reviews yet