Ashirvad Flowguard Plus CPVC Coupler

Ashirvad Flowguard Plus CPVC Coupler is an essential fitting for creating straight, leak-free connections between two CPVC pipes of equal diameter. Manufactured from high-grade CPVC compound with FlowGuard Gold technology, this coupler provides exceptional strength and durability in hot and cold water distribution systems. The precision-molded socket design ensures proper pipe insertion depth and optimal solvent cement bonding for permanent, pressure-tight joints.
The coupler’s smooth interior bore maintains consistent water flow without turbulence or pressure drop, while the corrosion-resistant CPVC material eliminates the rust and scale buildup common with metal couplings. Ideal for extending pipe runs, repairing damaged sections, or connecting pre-cut pipe lengths, this fitting is compatible with all Ashirvad Flowguard Plus CPVC pipes and fittings when installed with recommended solvent cement.

Technical Specifications (Quick Reference)

Specification
Details

Fitting Type
Coupler (Straight Connector)

Material
CPVC (Chlorinated Polyvinyl Chloride)

Maximum Temperature
93?C (200?F) continuous service

Pressure Rating
SDR-11 (PN 15 / 15 kg/cm? at 25?C)

Connection Type
Socket (Solvent Weld) – Both ends

Standards
ASTM D2846, NSF certified for potable water

Recommended Applications

Pipe Extension: Joining two pipe sections to extend hot or cold water distribution runs

Repair Work: Replacing damaged pipe sections by cutting out the defective portion and coupling new pipe

Straight Connections: Creating continuous pipe runs in bathroom, kitchen, and utility room plumbing

Geyser Installations: Connecting hot water outlet pipes from geysers to distribution lines

Overhead Tank Lines: Joining cold water supply pipes from overhead tanks to fixtures

Manifold Systems: Creating distribution manifolds for multi-outlet plumbing systems

Installation Guidelines

Pipe Preparation: Cut pipes squarely using pipe cutter; deburr and chamfer both pipe ends at 10-15? angle

Dry Fit Test: Insert both pipes into coupler sockets to verify proper fit (pipes should insert 2/3 of socket depth)

Surface Cleaning: Clean all pipe ends and coupler socket interiors with CPVC cleaner to remove contaminants

Solvent Cement Application: Apply Ashirvad CPVC solvent cement evenly to pipe ends and coupler sockets; insert pipes with quarter turn and hold for 30 seconds each

Curing & Testing: Allow 15 minutes set time; wait 1 hour before handling and 24 hours before pressure testing