Araldite Standard Epoxy Adhesive

Araldite Standard Epoxy Adhesive is a professional-grade two-component high-strength epoxy adhesive specially engineered for demanding structural bonding and repair applications. Designed to deliver exceptional durability and long-lasting performance, the advanced epoxy formulation provides a bond strength of approximately 120 kg/sq.cm along with a load-bearing capacity exceeding 470 kg. Its superior mechanical strength and resistance properties make it an ideal solution for industrial, automotive, construction, maintenance, and heavy-duty DIY applications requiring reliable structural bonding.

The adhesive offers excellent waterproof, chemical-resistant, heat-resistant, and corrosion-resistant properties, enabling dependable performance in challenging environmental and operational conditions. Araldite Standard is suitable for bonding a wide variety of materials including metal, wood, concrete, masonry, ceramics, stone, and several other commonly used construction and engineering substrates. Its strong adhesion and structural integrity make it particularly effective for metal fabrication, machinery repairs, automotive components, concrete restoration, ceramic repairs, wood bonding, and industrial assembly applications.

One of the key advantages of Araldite Standard Epoxy Adhesive is its extended pot life of approximately 45–50 minutes, which provides sufficient working time for accurate positioning, alignment, and assembly of bonded components before the adhesive begins to set. This extended application window is especially beneficial for complex repairs and large bonding surfaces requiring careful adjustment.

For optimal performance, all bonding surfaces should be clean, dry, and properly roughened to improve adhesion. Remove any dust, grease, oil, rust, paint, or contaminants prior to application. Equal parts of the resin and hardener should be mixed thoroughly until a uniform consistency and color are achieved. The mixed adhesive should then be applied evenly to one or both surfaces within the available pot life period. After joining the components, the bonded parts should be clamped, supported, or held firmly in position during the initial setting phase to ensure proper contact and alignment. Allow approximately 24 hours for complete curing before exposing the bonded assembly to heavy loads, operational stress, or service conditions to achieve maximum bonding strength and structural durability.